All guides can be downloaded as a pdf version.
A list of former versions of calibration guides and the differences between versions can be found here
No. 2 | Calibration of Gauge Block Comparators | TC-L| Version 2.0, 03/2011
No. 3 | Calibration of Pressure Balances | TC-M | Version 1.0, 03/2011
No. 4 | Uncertainty of Force Measurements | TC-M | Version 2.0, 03/2011
No. 6 | Extent of Calibration for Cylindrical Diameter Standards | TC-L | Version 2.0, 03/2011
No. 7 | Calibration of Oscilloscopes | TC-EM | Version 1.0, 06/2011
No. 8 | Calibration of Thermocouples | TC-T | Version 2.1, 10/2011
No. 10 | Determination of Pitch Diameter of Parallel Thread Gauges by Mechanical Probing | TC-L | Version 2.1, 12/2012
No. 11 | Guidelines on the Calibration of Temperature Indicators and Simulators by Electrical Simulation and Measurement | TC-T | Version 2.0, 03/2011
No. 12 | Guidelines on the Evaluation of Vector Network Analysers (VNA | TC-EM | Version 2.0, 03/2011
No. 13 | EURAMET Calibration Guide No. 13: Calibration of Temperature Block Calibrators | TC-T| Version 3.0, 02/2015
No. 14 | Guidelines on the Calibration of Static Torque Measuring Devices | TC-M | Version 2.0, 03/2011
No. 15 | Guidelines on the Calibration of Digital Multimeters |TC-EM | Version 3.0, 02/2015
No. 16 | Guidelines on the Estimation of Uncertainty in Hardness Measurements | TC-M | Version 2.0, 03/2011
No. 17 | Guidelines on the Calibration of Electromechanical Manometers | TC-M | Version 2.0, 03/2011
No. 18 | Guidelines on the Calibration of Non-Automatic Weighing Instruments | TC-M | Version 4.0, 11/2015
No. 19 | Guidelines on the Determination of Uncertainty in Gravimetric Volume Calibration | TC-F | Version 2.1, 03/2012
No. 20 | Calibration of Temperature and / or Humidity Enclosures |TC-T | Version 4.0, 02/2015
No. 21 | Guidelines on the Calibration of Standard Capacity Measures using the Volumetric Method | TC-F | Version 1.0, 04/2013
No. 1 | Calibration of Stylus Instruments for Measuring Surface Roughness | TC-L
The Guide is no longer available. TC-L recommends the use of DKD-R 4.
No. 5 | Coordinate Measuring Machine Calibration | TC-L
The Guide is no longer available. Superseded by ISO 10360 series: Geometrical Product Specifications (GPS) – Acceptance and reverification tests for coordinate measuring machines (CMM).
No. 9 | Measurement and Generation of Small AC Voltages with Inductive Voltage Divider | TC-EM
The Guide has been withdrawn since it was outdated and no longer used.
The calibration guides were originally published by EAL Committee 2 (Calibration and Testing activities). They have been revised and re-published by the corresponding EURAMET Technical Committees (TC). The copyright of all guides is held by © EURAMET e.V. 2007.
For further information and to suggest topics for new guides, please contact the EURAMET Secretariat or the TC Chair of the corresponding EURAMET Technical Committee.
No. 1 | Extrapolation of SPRT calibrations below the triple point of argon, 83.8058 K, and traceability in baths of liquid nitrogen at ~77.3 K
EURAMET Technical Guide No. 1 | Version 1.0 (03/2011) | Developed by the EURAMET Technical Committee for Thermometry
No. 2 | EURAMET Guide on Lifetime and Drift/Stability Assessment of Industrial Thermocouples
EURAMET Technical Guide No. 2 | Version 1.0 (05/2015) | Developed by the EURAMET Technical Committee for Thermometry
No. 3| EURAMET Technical Guide |Use of GPS Disciplined Oscillators
EURAMET Technical Guide No. 3 | Version 1.0 (03/2016) | Developed by the EURAMET Technical Committee for Time and Frequency
Notification about updates of EURAMET Calibration Guides and Technical Guides
To receive information about updates of EURAMET Calibration Guides and Technical Guides please subscribe here.
EURAMET is the Regional Metrology Organisation (RMO) of Europe. We coordinate the cooperation of National Metrology Institutes (NMI) in Europe in fields such as research in metrology, traceability of measurements to the SI units, international recognition of national measurement standards and related Calibration and Measurement Capabilities (CMC). Through Knowledge Transfer and cooperation among our members EURAMET facilitates the development of the national metrology infrastructures.
More online at: http://www.euramet.org
fon.: +49 531 592 1960
fax.: +49 531 592 1969